Talk about the common sense of correct starting for the price of low flat semi-trailer. Low flat panel semi-trailer is widely used in recent years. Its correct starting mode is as important as that of other vehicles. The correct starting mode is conducive to our safety. Let's talk about the correct starting mode of low flat panel semi-trailer.
1. Before starting the low flat semi-trailer, first turn around the low flat semi-trailer. See if there are any obstacles before and after the low flat semi-trailer, and whether the foam fire tire pressure is normal or not.
2. Before shifting, step on the green sprinkler clutch with your left foot to completely separate the clutch. After stepping on the brake with your right foot, put the gear handle into the starting gear, move your right foot to the accelerator position, and slowly lift the clutch with your left foot. When you reach the contact point, you feel that the car is going to shut down or shake. Step on the accelerator gently and release the hand brake to make the car start smoothly.
3. After the normal driving of the low flat semi-trailer, the vehicle speed shall be controlled and the straight and uniform speed shall be maintained as far as possible, which can effectively reduce fuel consumption, protect tires and increase the service life of the low flat semi-trailer. Whether the tire pressure is normal and other aspects are good.
4. Check whether the engine oil and cooling water of the low flat semi-trailer engine are sufficient, and whether the front and rear lights, signal lights and instruments work normally. If any problem is found, it shall be handled in time.
5. Adjust the low flat panel semi-trailer seat, and then check whether the rear-view mirrors on both sides and the interior rear-view mirrors are used to seeing, and whether there are too many dead corners adjusted to their proper position.
6. After confirming that everything is OK, turn on the ignition switch and observe the operation of all indicator lights on the instrument panel.
7. Under normal circumstances, when starting the engine, you can listen to whether the working sound of the engine is normal and whether there is abnormal noise. At the same time, observe whether the conditions around the vehicle meet the driving requirements.
